Argent Litho All articles
Production Planning

Reading It at Arm's Length: Typography Checks Before a Litho Job Reaches the Plate

Argent Litho
Reading It at Arm's Length: Typography Checks Before a Litho Job Reaches the Plate

Photo by Photo by Mika Baumeister on Unsplash on Unsplash

Typography is usually discussed as a matter of taste. On a litho job it is a matter of manufacture. A typeface chosen for its elegance, set at a size that flatters a screen, becomes a set of marks on a plate that has to carry ink onto a moving sheet at speed. Some of those marks will survive the journey. Others will not, and the difference is rarely visible on the PDF that gets signed off.

The useful question for a print buyer is not whether the typography looks good, but whether it is specified within limits the process can hold. Most of those limits are known, repeatable and cheap to design around — provided they are raised before plates are made rather than after the first sheets come off the press.

The point size that actually survives

Minimum type sizes are usually quoted as a single figure, which is unhelpful. The workable size depends on the stock, the colour of the ink, the weight of the typeface and the viewing distance.

As a working rule for litho on coated silk or gloss, positive text below about 6pt starts to become a gamble, and 7pt to 8pt is the comfortable floor for anything a reader is expected to consult. On uncoated stocks — particularly bulky, absorbent uncoated papers — ink spreads into the fibre and counters begin to fill. A 7pt uncoated setting that looked generous in the design studio can read as 6pt on the sheet. Move the floor up by a point or two.

Viewing distance matters as much as the specification. A footnote on an A4 page is read at roughly 40cm, not at arm's length across a meeting room. That gives some latitude, but not unlimited latitude, and it does not excuse body copy set at 7pt simply because the page has a lot to say.

Reversed-out text is a different problem

White type on a solid or heavily inked background is one of the most common causes of a reprint. The ink sits around the letterform rather than forming it, and where two or more process colours overlap, registration drift closes the counters from both sides.

Specify reversed type larger than positive type — 8pt as an absolute minimum on coated stock, 9pt to 10pt on uncoated. Prefer a medium or semibold weight over a light one, and avoid faces with fine joins, delicate serifs or narrow apertures. A reversed line of 6pt Didone on a dark background is a specification asking for trouble; a 9pt humanist sans is not.

If the design calls for a large area of dark ink with text knocked out, consider whether the background can be built from a single colour rather than four. Every colour removed from the build is one fewer opportunity for the sheet to move between units.

Serifs, hairlines and the discipline of the face

High-contrast typefaces — the kind with hairline strokes and heavy stems — are beautiful in a specimen book and fragile on a press. At small sizes the thin strokes can drop below the resolution the plate and blanket can reliably reproduce, particularly on uncoated stock where dot gain is greater.

This does not ban elegant faces. It asks for them to be used at sizes and weights where the hairlines stay above the threshold. If a serif face is carrying body copy at 8pt on a 120gsm uncoated, check whether a slightly heavier weight or a different cut is available. Many families offer a text optical size or a caption weight for precisely this reason, and switching to it costs nothing at artwork stage.

Engraved-style and script faces deserve particular caution. Fine connectors and thin joins often break up, and the effect is inconsistent across the run rather than uniformly poor — which is worse, because it defeats any attempt to judge the proof.

Rules, keylines and the registration budget

Fine rules are the typographic equivalent of a hairline serif, and they fail in the same way. A 0.25pt rule will print on a well-controlled press, but it has almost no margin for the ordinary variation of a long run. Half a point is a more honest minimum for decorative rules, and 1pt is safer still for anything that must read as a deliberate line rather than a printer's accident.

Registration tolerance on sheetfed litho is typically quoted at around 0.1mm, and that is the figure to design against rather than the best sheet you have ever seen. Any element that depends on two colours aligning exactly — a fine keyline around a photograph, a two-colour rule, small type in a duotone — should carry at least 0.25mm of overlap or trapping so that a small drift does not produce a white gap.

Tints and screens: the quiet failure

Pale tints are where typography and paper meet most awkwardly. A 5% tint on uncoated stock can print as an uneven wash, or disappear entirely in areas of low ink demand. Screens below around 10% are best avoided on uncoated papers, and small type set in a pale tint should be treated as a design flourish rather than a readable element.

Similarly, remember that fine detail and high screen rulings are not the same ambition. Much of the good sheetfed litho in the UK runs comfortably at 175 lines per inch; pushing to 300 lines on a stock that cannot hold it adds cost and subtracts legibility.

A checklist to apply before approval

None of this is a substitute for a good designer. It is simply the manufacturing conversation that belongs alongside the design one, and it is much cheaper held now than discovered at the delivery stage. Type that survives a litho press is not cautious type; it is type specified with the process in mind.

All Articles

Related Articles

Plates in the Rack, Figures on the File: Making a Repeat Litho Run Pay

Plates in the Rack, Figures on the File: Making a Repeat Litho Run Pay

Many Audiences, One Press: Planning Litho Versions Without Losing the Run

Many Audiences, One Press: Planning Litho Versions Without Losing the Run

The Spaces Between the Figures: Making Litho Estimates Truly Comparable

The Spaces Between the Figures: Making Litho Estimates Truly Comparable